USING THE DEVICE
1. Remove the outer cover
Remove it as per a sequence reverse to installation order (see Fig.
5).
2. Open the nebulizer
Hold the main unit with your left hand, pinch the nebulizer lock
with the thumb and forefinger of your right hand and snap it
upward to open the nebulizer as in Fig. 6.
4. Close Nebulizer
As shown in Fig. 8, hold the main unit of the device with your
left hand and close the nebuliser cover with your right hand,
press the lock downwards with the thumb to the point when
you hear a clicking sound that indicates a good closing state.
5. Reinstall the Outer Cover
(see the section – Assembling the Device)
3. Add the liquid
Pour the liquid drug into the drug storage
area (near the nebulising head side) as in Fig.
7.
Note: The maximum and minimum
volume of liquid is 8ml (at MAX
LEVEL mark) and 0.5ml respectively.
If it is needed that the temperature
of liquid be adjusted, add hot or cold water into the temperature adjustment
storage area.
