28
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO
Camera goes in to B&W mode at low light.
GLOBAL
Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” +
ENTER
will turn Off the NIGHT SHOT
mode and “888” +
ENTER
will turn On the NIGHT SHOT mode.
ON
B/W mode
OFF
Color mode
NOTE: AUTO in NIGHT SHOT function is not applied in “MANUAL” mode of AE Control.
ADDITIONAL AE
ADDITIONAL AE SETUP
ACE : OFF
WDR : OFF
WDR WEIGHT : --
BLC : OFF
HLC : OFF
HLC LEVEL : --
HLC COLOR : ---
DEFOG : OFF
EXIT(ESC TO EXIT)
ACE
OFF, LOW, MID, HIGH
WDR
OFF, ON
(NOTE: When ON, BLC will be disabled.)
WDR WEIGHT
LOW, MID, HIGH
BLC
OFF, ON
(NOTE: When ON, WDR will be disabled.)
HLC
OFF, ON
HLC LEVEL
0 ~ 20
HLC COLOR
BLACK, WHITE, YELLOW, CYAN, GREEN, MAGENTA, RED, BLUE
DEFOG
OFF, ON
• CAMERA CONTROL
CAMERA CONROL
D->N LEVEL : 076
N->D LEVEL : 042
D/N DELAY : 03 SEC
CHROMA : 08
GAMMA : 2
DNR : MID
DIS : OFF
SAVE AND EXIT(ESC TO CANCEL)
D->N LEVEL
0 ~ 255
N->D LEVEL
0 ~ 255
D/N DELAY
1 ~ 60 seconds
CHROMA
0 ~ 20
GAMMA
0 ~ 4
DNR
OFF, LOW, MID, HIGH
DIS
OFF, ON