16
Figure 3
NOTE:
Distribution of the load is more important than the load itself
.
5.3. ROTOR INSTALLATION
Put some light oil on the drive head to prevent sticking.
Be careful that the rotor fits on the drive shaft (See Figure 4).
Screw the shaft nut with socket wrench to the clockwise direction. Make sure that shaft nut is
screwed tightly, but do not expose over-force to the socket wrench while screwing.
For swing-out rotors, lubricate the pins where the buckets are hanged.
Place the buckets to the rotor.
Connect the centrifuge to the power supply.
Figure 4
