NUVE EN 032 Instruction Manual Download Page 2

 

Dear Nüve User, 

We  would  like  to  take  this  opportunity  to  thank  you  for  preferring  this  Nüve  product.  Please 
read the operating instructions carefully and keep them handy for future reference. 

Please  detain  the  packing  material  until  you  see  that  the  unit  is  in  good  condition  and  it  is 
operating  properly.  If  an  external  or  internal  damage  is  observed,  contact  the  transportation 
company immediately and report the damage. According to ICC regulations, this responsibility 
belongs to the customer. 

While you are operating the instrument please; 

1.

 

obey all the warning labels, 

2.

 

do not remove the warning labels, 

3.

 

do not operate damaged instrument, 

4.

 

do not operate the instrument with a damaged cable, 

5.

 

do not move the instrument during operation. 

In case of a problem contact your Nüve agent for an authorized service or maintenance. 

The  validity  of  the  guarantee  is  subject  to  compliance  with  the  instructions  and  precautions 
described in this manual. 

Nüve reserves the right to improve or change the design of its products without any obligation 
to modify previously manufactured products. 

Information  contained  in  this  document  is  the  property  of  Nüve.  It  may  not  be  duplicated  or 
distributed without its permission. 

 

NÜVE  
SANAYİ MALZEMELERİ  
İMALAT VE TİCARET A.Ş. 

Saracalar Mahallesi, Saracalar Kümeevleri No:4/2 Akyurt 06750 ANKARA 
Ankara / TURKEY                            
Tel 

: (90.312) 399 28 30 (pbx)                                        

Fax 

: (90.312) 399 21 97                                                            

Sales  : [email protected]      
Technical Service: [email protected] 

Summary of Contents for EN 032















Reviews: