74
3.1.5
Software Installation – SCB-C24/26/28
The default ID of I/O Box is identical. To avoid the conflict between Boxes,
please connect only one Box with SCB-C31 and execute the setup application
to change the ID from the default value (1).
1.
Execute IOConfig.exe, type in the IP address and port of SCB-C31, and
click the
Scan
button.
IOConfig.exe starts scanning the ID from 0 to 255, and it may take around a minute
to finish scan.
2.
When the I/O Box is discovered, click on the item and change the ID from
the
New Address
field. Click the
Update device
button to activate the
settings.
3.
Scan again to make sure the configuration is validated. In this case, we
changed the ID to 10, so we can modify the number of “Starting address”
