45
2.5.2
Network Settings
1.
Log in to the unit.
2.
Click
Network Setup
/
Network Setup
.
3.
Click the
Setup
tab to set up the network settings of your unit.
Server Name
: Name your unit.
Because of the internal data modifications required, it takes a few seconds to change
the name of your unit. Log in again after configuration activated.
Internet Protocol
: Choose to obtain an IP address from external DHCP
server automatically, or configure the IP address manually.
IP Address
: IP address of this unit.
Subnet Mask
: Subnet mask address.
Default Gateway IP Address
: Gateway IP address.
Primary DNS
: Primary DNS (Domain Name System) address.
Secondary DNS
: Secondary DNS address.
4.
Click the
DDNS Setup
tab to enable Dynamic Domain Name Server
function, allowing you to connect unit with dynamic IP address.
