![background image](http://html1.mh-extra.com/html/nuttall/flexeserve-zone-1000/flexeserve-zone-1000_operation-manual_1719628016.webp)
OPERATION MANUAL
FLEXESERVE ZONE® 3, 4, 5 TIER - FLOOR STANDING
FLEXESERVE® | Operation Manual │ Flexeserve Zone® 3, 4, 5 Tier - Floor Standing North America | R8 APR 2021 | 40002206
Page | 16 of 22
Ambient Individual Zones/Tiers
WARNING
In an emergency, switch off the appliance and isolate fully from the mains supply.
Ensure that you take time to familiarise yourself with this location.
CAUTION
When switching from heating mode to ambient mode, the surface of the zones will
remain hot for a period of time. Ensure that the unit has sufficiently cooled before
placing ambient products into the zone (shelf).
Switch on the zone power switch and the controller will illuminate. The display will show the ambient
temperature.
To select the ambient mode
Press the heating enable/disable button and the display will read ‘OFF’. Visually, you will see that the fan
has stopped rotating and there is no air circulating around the zone. The zone is now in ambient mode.
Where multiple ambient zones are required, select and press the appropriate heating enable/disable
button separately.
No products should enter the display area until the zone has cooled adequately to the required ambient
temperature.
To reactivate the heating mode
Press the heating enable/disable button and the display will read the current operating temperature.
Visually, you will see that the fan has started rotating and air is now circulating around the zone. The zone
is now in heating mode.
No products should enter the display area until the zone has heated to the required temperature.
Zone power switch
I = On position
O = Off position
Heating
enable/disable
button
Controller display
Summary of Contents for flexeserve ZONE 1000
Page 1: ......