6)
Not easy to clean the machine.
a)
After noodle finished, take off the Noodle Molding, use a cloth to clean the tank, axis and
molding. It will be easier if you clean after one or two hour, because the flour become
dry and easily tear off.
b)
Left the Noodle Molding for half an hour, when the paste become dry, you can use a
needle to clean the paste inside the molding hole. Or you wait a longer time until the
paste is totally dry, and strike the molding and the paste will drop off.
7)
How to successfully assemble the machine.
a)
Put the Mixing Tank first, then assemble the axis, and the supporting board, and noodle
molding. Then drive the fasten screw and lock the tank firmly. Close the Lid Cover.
b)
When assemble the supporting board it must fixed well with the tank.
c)
All the assemble parts should have no gap between each other.
8)
The motor rotate but mixing axis not working.
Double confirm if the axis is assembled firmly.
9)
The Noodle Molding/supporting board cracked, or the mixing axis broken.
The paste is too dry and will damage the machine, please contact service center and replace
the new parts.
Technical Parameter
Product rating
Product Name
Noodle Maker
Model Number
PKPM350
Voltage
220V
Frequency
50Hz
Wattage
180W
