Control panel
Automatic Mode
1)
Press “Automatic” one time, use two measuring cup of flour. Mixing time is 4 minutes, and
the noodles will come out within 12 minutes. After the mixing is done, the axis will reverse
for 8 seconds. If not all of the noodles come out, press the “Out” and the noodles will
continue come out.
2)
Press the “Automatic” button twice, use one measuring cups of flour. The mixing time is 4
minutes, and the noodles will come out within 8 minutes. After the mixing axis is done, it will
reverse for 8 seconds. If all of the noodles don’t come out, press the Out button and the
noodles will continue to come out.
Manual Mode
1)
After the machine is ready, put the flour into the tank, and close the tank cover. Then press
“Mix”; the LED will flash for 3 seconds and start mixing. The default time is 4 minutes, you
can press “+” or “-” to increase or decrease time. When mixing starts, put the correct amount
of water into the cover slot.
2)
After mixing, press “Extrude” and noodle will start coming out. After it’s done, the mixing
axis will reverse for 8 seconds. If not all the noodle coming out, press “Extrude” and noodle
will continue come out. The defaulted time is 12 minutes; you can press “+” or “-” to increase
or decrease time.
3)
During operation, if the lid cover is open or electricity is cut off, the device has memory of
the previous job for 10 minutes. If you can close the lid cover or connect the device, it will
continue to work.
Remarks: the program was set to Mix before Extrude. So if user presses “Extrude” by mistake, the
device will not work.
During device operation, you can press “Cancel” at any time to stop or choose other function.
