NuTone SENSONIC VOICE VC110CCT Installation Instructions Manual Download Page 4

4

1

10

Install grille.

Connect plug from grille to 
wire panel. Squeeze grille 
springs and insert into slots in 
blower. Push grille up against 
ceiling.

If grille spring 

becomes dislodged 

from grille - snap it 

back into place as 

shown.

1108938A

1

11

Install wall control.

1

2

Note: Location of wall control must be within
20 feet (not obstructed) of grille.

Use one of two methods to attach control:

 

(1) Mount control to new single-gang 
electrical box. (Recommended method.)

 

(2) Mount control to wall with clearance hole 
in wall.

Remove control module, install 2-AAA batteries, 
and replace module.

Snap control cover in place. Note: Metallic cover 
plates are not recommended.

1

12

Download the VoiceControl app.

Download the VoiceControl app from the Apple 
App Store or on Google Play. Set the device 
name in the app. For more information, refer to 
the unit quick start guide.

Note orientation of tab 

and buttons.

WHITE

LIGHT

BUTTON

WIRING DIAGRAM

WHITE

BLACK

RED
GROUND

(bare)

WIRING PLATE

120 VAC

LINE IN

RECEPTACLE

(FAN)

RECEPTACLE

(LIGHT)

Summary of Contents for SENSONIC VOICE VC110CCT









Reviews: