Nussbaum TOP LIFT TSK 12000 DJ, Operating Manual, Inspection Book

Page: 5 / 56

Operating Manual and Inspection Book
TOP LIFT TSK 12000 DJ
- 5 -
The Owner/Employer shall establish procedures to periodically inspect the lift in ac-
cordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM- 2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance; and the employer shall insure that the lift inspectors are qualified
and that they are adequately trained in the inspection of the lift.
The Owner/Employer shall establish procedures to periodically maintain the lift in ac-
cordance with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and the employer shall insure that the lift maintenance
personnel are qualified and that they are adequately trained in the maintenance of
the lift.
The Owner/Employer shall maintain the periodic inspection and maintenance records
recommended by the manufacturer or ANSI/ALI ALOIM-2008 (R2013), American Na-
tional Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance.
The Owner/Employer shall display the lift manufacturer’s operating instructions; :
ALI/SM 10-1, safety manual; ALI/ST-17; ANSI/ALI ALOIM-2008 (R2013), American Na-
tional Standard for Automotive Lifts-Safety Requirement for Operation, Inspection and
Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards; and in case
of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for
Frame Engaging Lifts; in a conspicuous location in the lift area convenient to the op-
erator.
Additional owner/employer responsibilities
•
Shall require that Personal Protective Equipment (PPE) be used according to the
appropriate regulations.
• Shall display the “Safety Regulations” and adhere to them closely.
• Shall ensure that all safety- and danger signs on and around the Lift are observed
and followed!
• Shall follow the specified time intervals between the recommended inspection
and maintenance procedures and tests.
• Shall use only spare parts that comply with the technical requirements specified
by the manufacturer.
• Shall ensure that loose screws, nuts, and bolts are firmly tightened after mainte-
nance.
• Shall not modify the Lift without written consent of Nussbaum.
• Shall ensure that these instructions are maintained and available to all personnel
that install, use or maintain the lift. This document contains important information
about installation, operation, and maintenance of the automotive Lift. Any
changes to the installation and or location of the automotive Lift must be docu-
mented.
1.4 Lift operator responsibilities
• Shall read and understand all safety and warning instructions in the manual or af-
fixed to the lift.
• Shall be trained to operate and use the TSK 12000 DJ Lift for its designed use.
• Shall be familiar with accident prevention and basic labor safety regulations.
• Shall not allow unauthorized personnel to operate the Lift.