Nussbaum TOP LIFT TSK 12000 DJ, Operating Manual, Inspection Book

Page: 4 / 56

Operating Manual and Inspection Book
TOP LIFT TSK 12000 DJ
- 4 -
1 General informations
Important safety instructions – Save these instructions
1.1 Lift purpose
Nussbaum lifting systems are the result of over 35 years’ experience in the automotive
lifting industry. The high quality and superior concept ensures reliability, a long Lift life-
time, and a strong economic business solution for your automotive lifting needs.
The TSK 12000 is a hydraulic symmetric In-Ground Lift with a lifting capacity of 12000
pounds.
The Lift features a powerful integrated power unit and hard-chromed cylinders. The
maximum load distribution is 3000 lbs per arm.
1.2 Liability
To avoid unnecessary damage, injury or death, read all operating instructions care-
fully. Nussbaum is not liable for any damages, injuries, or deaths resulting from misuse
of the Lift. The user carries the risk alone.
There will be no guarantee or liability for incidents involving injuries, death, or damage
to equipment if these incidents are the result of one or more of the following:
•
Inappropriate use of the Lift to include: Inappropriate installation, operation, and
maintenance of the Lift.
• Use of the Lift while security devices are inoperative, not working properly, or are
installed incorrectly.
• Failure to follow the operating instructions regarding transport, storage, installation,
initiation, operation, and maintenance of the Lift.
• Unauthorized changes to the design and operation of the Lift.
• Wrong or incorrect maintenance practice.
• Catastrophes, acts of God, or external reasons.
• Nussbaum Lifts are warranted with the use of Nussbaum original or replacement
parts. Use only replacement parts approved by the original equipment manufac-
turer or parts meeting original manufacturer specifications. Use of unauthorized
parts may void the warranty. For parts, call Nussbaum at 1-704-864-2470.
• It should be recognized that any piece of equipment can be dangerous when
operated improperly.
1.3 Owner/Employer responsibilities
Automotive lift institute safety requirements for operation, inspection and maintenance
(ANSI/ALI ALOIM)
The Owner/Employer shall insure that lift operators are qualified and that they are
trained in the safe use and operation of the lift: ALI/SM 10-1 safety manual; ALI/ST-17 ;
ANSI/ALI ALOIM-2008 (R2013), American National Standard for Automotive Lifts-Safety
Requirement for Operation, Inspection and Maintenance; ALI/WL Series, ALI Uniform
Warning Label Decals/Placards; and in
case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference
Guide for Frame Engaging Lifts and SAE J2184, Vehicle Lifting Points for Service Garage
Lifting.