Nussbaum SPL 3200, Operating Instruction And Documentation

Page: 18 / 43

• When the wheels have been lifted free, stop with lifting; let go of operating
(reversing) switch and check safety sit of the pads under the vehicle.
The sit of the pads under the vehicle is very important. If the position
of the pads isn’t all right the vehicle might fall down!
Lifting great vehicles (transporter, cross country cars) pay attention that the roof
d o e s n ’t touch the traverse of the lift. In case the vehicle touches the traverse of
the lift, a switching off strip is pressed upside, which pulls the operating switch
via rod assembly to position ”0” , so the lift doesn’t lift any more. Afterwards the
operating switch can not be turned to position "
↑
"any more. However the lift can
still be lowered by pulling the operating lever (refer to ”lowering of the lift”).
After lowering the lift to the position where the switch off strip is free, the
operating switch is released and the lift can be lifted again.
• Lift vehicle on height for working; turn operating switch to position "
↑
", keep it
until height for working or top position is reached
1 8
Instruction and Documentation
SPL 3200
pic. 1: operating elements
(front view)
(side view)
(side view)