Nussbaum HL2150.034-7016, Operating Manual

Page: 13 / 80

OPI-POWER LIFT HDL 15000 - HDL 18000-V1.0-EN 13
3 Technical information
3.1 Technical data
Load carrying capacity HDL 15000 = 15000 lbs
(6500 kg)
HDL 18000 = 18000 lbs
(8000 kg)
Loading a lifting arm A single load from only
one lifting arm may not
happen
Lift / lowering time approx. 70 sec. / 55 sec.
Standard operating
voltage
1 ~/N+PE, 230 V, 60 Hz
Motor capacity HDL 15000: 2 x 3 HP
HDL 18000: 2 x 3 HP
Motor speed 3450 rpm
Operating pressure HF 8000: 3900 psi
Pressure relief valve HDL 15000:
approx. 3600 psi
HDL 18000:
approx. 3700 psi
Oil volume approx. 4,5 GAL
Noise level L
PA
≤ 70 dB
on-site connection 1 ~/N+PE, 230 V, 60 Hz
with 16 Amp slow blow
fuse according to VDI
Regulations
Noise level LPA: ≤ 70 dB
on-site connection: 1~/N+PE, 230 V, 60 Hz
with 16 A fuses, slow, ac-
cording to US regulations
3.2 Safety devices
• Over-pressure valve
Hydraulic system fuse against over-pressure
• Check valve
Secure the vehicle against unauthorised lowering
• Lockable main switch
Fuse to prevent unauthorised use
• Hydraulically unlockable safety system on the
cylinders
Secure against unauthorised lowering of the lift.
• Up Off
Safety against a vehicle driving too widely onto
the lift.
• Pneumatic lifting arm block
Safety against adjusting the lifting arm