Nuna Pipa lite, Manual

Page: 10 / 295

EN EN
6 5
PIPA lite Instructions
PIPA lite Instructions
For use with base
The infant child restraint with Base is a “Semi-
Universal Child Restraint” and should be fitted
using at 3 point adult seat belt approved to UN
ECE regulation 16 or the ISOFIX connections.
For Installation with 3-point-belt
It will fit vehicles fitted with 3-point retractor
safety-belts. Seat positions in other cars may also
be suitable to accept this child restraint. If in doubt,
consult either the child restraint manufacturer or
the distributor.
For Installation with ISOFIX System
This is an ISOFIX CHILD RESTRAINT SYSTEM.
It is approved to Regulation NO. 44, 04 series of
amendments for general use in vehicles fitted with
ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX
positions (as detailed in the vehicle handbook),
depending on the category of the child seat and
of the fixture. If in doubt, consult either the child
restraint manufacturer or vehicle manufacturer.
The ISOFIX size class for which this device is
intended is C and D.
WARNING
Always secure child in child restraint, even
on short trips, as this is when most accidents
occur.
Any straps holding the restraint to the vehicle
should be tight, that any straps restraining
the child should be adjusted to the child’s
body, and that straps should not be twisted.
Be sure that the child restraint is installed in
such a way that no part of it interferes with
movable seats or in the operation of vehicle
doors.
Before carrying the infant child restraint by
hand, ensure that the child is fastened with
the safety harness, and that the handle is
correctly locked in a vertical position.
Consult the distributor for issues concerning
maintenance, repair and part replacement.
Please keep this child restraint away from
sunlight, otherwise it may be too hot for
child’s skin. Always touch test seat before
placing child in it.
Remove this infant child restraint and
base from the vehicle seat when it is not in
regular use.
The soft goods should not be replaced with
any besides the ones recommended by the
manufacturer.