Numark TT-1650 Operating Instructions Manual Download Page 13

PAGE 12

RETURN INFORMATION

RETURN INFORMATION

 (US ONLY)

a) A Return Authorization number must be obtained from Numark through the address or phone numbers below.

b) A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.

c) The faulty equipment must be packed in its original packaging.

d) One additional outer layer of packaging must be included to ensure product safety. Failure to do so may 
inadequately protect the equipment in transit and, therefore, jeopardize the customer's warranty.

e) Numark will not accept COD shipments and no call tags will be issued for merchandise return.

f) Numark will not return repaired merchandise to customers by priority service, unless by written request at the 
customer's cost. Requests must be submitted in writing with merchandise returned.

g) The defective Numark equipment should be sent, FREIGHT PREPAID with Return Authorization number clearly 
printed on the outer packaging and original sales receipt enclosed to:

NUMARK INDUSTRIES
Attention: Service Department
200 Scenic View Drive
Cumberland, RI 02864-1847 USA
Phone: 1 (401) 658-3131
Fax: 1 (401) 658-3640 
Web: www.numark.com

Summary of Contents for TT-1650

















Reviews: