Numark TT-1650 Operating Instructions Manual Download Page 12

PAGE 11

WARRANTY

LIMITED PRODUCT WARRANTY

1. What is covered and for how long?  NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that 
NUMARK'S products; including but not limited to DJ mixers, amplifiers, CD players, CD Mix Stations, turntables, preamplifiers, 
beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories; are to be free from defects in 
material and workmanship under normal use and service for the period commencing upon the date of purchase from an 
authorized NUMARK dealer for a period of (1) Year.

1. What is not covered?  This Limited Warranty is conditioned upon proper use of the product by the purchaser.  This Limited 
Warranty does not cover: 
(a) Damage caused by improper installation or improper connection to any peripheral
(b) Damage caused by an external electrical fault
(c) Damage from use of parts not manufactured or sold by Numark
(d) Product purchased from anyone other than a Numark authorized dealer
(e) Modifications to product not approved in writing by Numark 
(f) Equipment that has the serial number removed or made illegible 
(g) Normal cosmetic and mechanical wear
(h) Damage or loss during transit to an Authorized Numark Repair Center
(i) Crossfaders

2. What are NUMARK'S obligations?  During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole 
option, without charge to the purchaser, any defective component part of the product.  NUMARK may, at NUMARK'S sole 
option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, 
reconditioned or new product.  Repaired products will be warranted for a period equal to the remainder of the original Limited 
Warranty on the original product or for 90 days, whichever is longer.  All replaced parts, components, boards and equipment 
become the property of NUMARK.  If NUMARK determines that any product is not covered by this Limited Warranty, purchaser 
must pay all parts, shipping, and labor charges for the repair or return of such product.

3. To obtain service under this Limited Warranty, purchaser must:
(a) contact NUMARK at the addresses below and obtain a return authorization number ("RA#")
(b) return the product to NUMARK in the original packaging or an adequate container for shipping.  Failures to do so may 
inadequately protect the equipment in transit and, therefore, jeopardize the customer's warranty.
(c) RA# must be clearly marked on the outside of the packing.  Failure to do so will result in merchandise return
(d) include purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the 
product, and the seller's name and address. 
(e) Numark will not accept COD shipments

4. What are the limits on NUMARK'S liabilities?  THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY 
IMPLIED WARRANTIES COVERING NUMARK PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.   
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, 
CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY 
TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK PRODUCT, BREACH OF 
WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS 
AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.  
THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER 
EXPRESS WARRANTIES.  THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER 
OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.  IF ANY PORTION OF THIS LIMITED WARRANTY IS 
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT 
AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS 
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

This Limited Warranty allocates risk of product failure between purchaser and NUMARK, and NUMARK'S product pricing reflects 
this allocation of risk and the limitations of liability contained in this Limited Warranty.  The agents, employees, distributors,
and dealers of NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warranties 
binding on NUMARK.  Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do 
not constitute warranties by NUMARK and should not be relied upon.

5. How does state law apply to this warranty?  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR 
EXCLUSIONS MAY NOT APPLY TO PURCHASER.

This Limited Warranty gives you specific legal rights.  You may also have other rights, which vary from one jurisdiction to 
another.  

Summary of Contents for TT-1650

















Reviews: