VirtualDJ 8
– Numark NV
20
Sampler Velocity mode
While the Sampler mode is selected, press the same SAMPLER mode button
again
to set
the PADs to
Sampler Velocity mode
(led will blink).
Same as the Sampler mode, each
one of the 8 pads triggers a sample
(1 to 8) from the selected Sampler
Bank
of
VirtualDJ,
with
the
difference that the Output
Volume
of each sample
is determined by
the strength the Pad was initially
pressed.
Press the pads to
trigger a
sample
.
Depending
on
the
selected trigger mode, use
SHIFT
and the same pads
to stop the
sample.
The functionality of the PARAMETER buttons (38) is the same as in the Sampler mode.
Tip:
To return all samples to their maximum values after the Velocity mode is used, select the next or
previous available bank and then select the current again.
Slicer mode
Press the
SLICER
mode button to set the PADs to
Slicer mode
.
The 8 Pads represent
8 sequential
slices in the Beat Grid
. The playing
Slice is represented by the currently
blue lit pad. The blue light will "move
through the pads" as it progresses
through each eight-Slice phrase.
Press a pad to repeat that Slice (hold
it down if you want to keep looping it).
Once the Pad is released the track will
continue to play from the position it
would have been if the pad was never
pressed.
Use the
PARAMETER
<
and
>
buttons (
38
) to adjust the
length of the Loop
applied to the
slice. Press
SHIFT
and then use the same PARAMETERS < and > buttons to adjust
the
step of the Slices.
Summary of Contents for NV
Page 1: ...VirtualDJ 8 Numark NV 1 ...
