VirtualDJ 8
– Numark NV
18
Manual Loop mode
Press the
LOOP
mode button to set the Pads to
Manual Loop mode.
Each one of the 8 pads offers a
different loop function.
Use Pads 1 and 2 to set a
Loop In
(Entry) and a
Loop Out
(Exit) point.
Use the 3
rd
pad to trigger an Auto
Loop
of the selected size or
exit
from
a manual loop.
Use Pad Nr4 to trigger the last
triggered Loop (
Reloop
)
Loop Fine adjust:
While a Loop is triggered use Pads Nr5 and 6 to
move
-shift the
Loop
backwards or forward
by the size of the applied Loop.
While a Loop is triggered hold down Pads 1 and 2 (both Leds will blink) and then use the
jogwheel to fine
move
-shift the
Loop
backwards or forward.
While a Loop is triggered
hold
down Pads 1
or
2 (Leds will blink) and then use the jogwheel
to
fine adjust the Entry and Exit point
of the loop.
The last 2 Pads offer
Loop Back
mode (when Loop is pressed, the current track’s position
will be considered as Loop Exit point) and
Smart Loop
(will snap the size of the manually
triggered loop to the nearest beat size).
Use the
PARAMETER <
and
>
(38) buttons to
half
and
double the size
of the Loop.
Saved Loops mode
Press the
LOOP
Mode button twice (or once if the selected mode was Manual Loop) to set
the Pads to
Saved Loops mode
(the led of the LOOP button will blink).
This mode offers the ability to
save
up to
4 Loops
to individual Loop
Slots
.
The 4 upper Pads will
save
the Loop at
the current track’s position (of the
selected size in beats) to slots 1 to 4.
Hold
SHIFT
down and then press these
Pads to
delete
the Saved Loop.
When a Loop slot is saved, press the
corresponding
lower
Pad
to
arm
(prepare) the Saved Loop.
If the track’s position is before the Saved Loop point, the loop will be enabled but the track
will not jump to that position (Prepare status). Use the same Pad to disable the Loop.
Summary of Contents for NV
Page 1: ...VirtualDJ 8 Numark NV 1 ...
