VirtualDJ 8
– Numark NV
10
39. SCRATCH
. Press this button to set the Jogwheel to
Vinyl
(Scratch) or
CD
(Bend)
mode
. In Vinyl mode, use the outer part of the Jogwheel to bend (temporary speed
up
– slow down the tempo of the track).
40. JOG
. Touch sensitive jogwheel. Use the jogwheel to scratch (if Vinyl mode is
selected) or pitch bend. The Jogwheel also offers Loop In and Loop Out point
adjustment (see
Manual Loop Pads mode
)
41. PITCH.
Adjust the track's playback speed (tempo). The white LED next to the fader
will light up when
the unit’s fader is set at 0%. The Red Up and Down Arrow LEDs
will lit if the pitch position of the unit and the actual pitch of the software do not match,
to indicate the direction you need to move the hardware fader in order to catch the
software one.
42. REVERSE/BLEEP.
While this button is
held
, the playback of the track will be
reversed
. When released the track will
resume
normal playback from where it would
have been if you had never engaged the Bleep function (i.e., as if the track had been
playing forward the whole time).
Hold
SHIFT
down and then use this button to
reverse
the playback of the track.
Repeat to resume normal playback from wherever the Audio Pointer stops.
43. SLIP MODE
. Press this button to activate the
Slip mode
. Several software functions
(such as Jogwheel movements, HotCues and Loops) will apply temporary on the
track, and the track will return to the position it would have been when those
functions are not triggered.
44. BEATS ENC
. This knob
moves
forward/backwards the
track by 1 beat
.
Hold
SHIFT
down and then use this knob to adjust the
Key
of the loaded track. Hold
SHIFT
and then
push
the knob to
reset
the
Key
of the track to its original value.
45. TOUCH EQ/FX (Left side).
Press this button to enable the
FX TOUCH Mode
. On this Mode the
Touch
Capacitors of the FX knobs trigger the Effects
while touched.
Press and hold
SHIFT
and then this button to enable the
EQ/FX TOUCH Mode
. Led
will blink to indicate this mode. On this Mode, the Touch Capacitors of the FX knobs
(35) trigger the Effects while touched (
same as FX TOUCH Mode
), and additionally
the
EQ Touch Capacitors will kill
the corresponding frequencies while touched.
45. FILTER MODE (Right side).
Press this button to enable the
FILTER ROLL Mode
(LED lights on). Holding
SHIFT
down, the button enables the
FILTER FX Mode
(LED
Flashes). See FILTER (24)
E. EFFECTS
Both Effect units (on the left and right side) offer
3 different modes
and control for the
Effects applied on the corresponding deck or Master.
Hold SHIFT down and then press the BEAT (46) button to toggle between the
Single
FX
and
Multi FX
effects mode. Use the MASTER FX A and B buttons (31) to assign the left (A)
or right (B) Effect unit to
Master FX
Effect mode.
Summary of Contents for NV
Page 1: ...VirtualDJ 8 Numark NV 1 ...
