9
Navigation Controls
33.
Scroll Knob:
Use this knob to scroll through lists of tracks, Crates, etc. in the software. You can
also press it to move between the panels shown in the software.
Press and hold
Shift
and turn this knob to quickly scroll.
34.
View / Sort by BPM:
Press this button to toggle through the available software display modes.
Press and hold
Shift
and then press this button to sort the Library by BPM.
35.
Back / Sort by Song:
Press this button to move the selector backward in the software panels.
Press and hold
Shift
and then press this button to sort the Library by Song.
36.
Area / Sort by Key:
Press this to toggle through the Files, Browse, Prepare, and History panels.
Press and hold
Shift
and then press this button to sort the Library by Key.
37.
L. Prep / Sort by Artist:
Press this button to add a selected track to the list of tracks in the
Prepare Area in the software.
Press and hold
Shift
and then press this button to sort the Library by Artist.
38.
Load:
Press one of these buttons while a track is selected to assign it to the corresponding
channel.
Pitch Controls
39.
Pitch Fader:
Controls the track's playback speed. An LED next to the fader will light up when set
at
0%
.
40.
Takeover LEDs:
When you select the other Deck with the
Deck Select
switch, the position of
the NS6II's
Pitch Fader
may not match the Pitch setting for that Deck in the software. Slowly
move the
Pitch Fader
in the direction indicated by the
Takeover LED
arrow until it turns off. At
this point, the Pitch Fader matches the Pitch setting in the software and can control it again.
41.
Pitch Bend ( + / – ):
Press or hold down either of these buttons to temporarily adjust the track's
playback speed. When released, the track playback will return to the speed designated by the
Pitch Fader
.
Press and hold
Shift
and then press these buttons to adjust the Tempo Range forward (
+
) or
backward (
–
).
Effects Controls
42.
FX 1, FX 2, FX 3:
These buttons have different functions on each Deck depending on the current
FX Mode:
Single-FX Mode
or
Multi-FX Mode
. Please see the
User Guide
for more information
on how each mode works.
43.
FX 1 Knob, FX 2 Knob, FX 3 Knob:
These knobs have different functions on each Deck
depending on the current FX Mode:
Single-FX Mode
or
Multi-FX Mode
. Please see the
User
Guide
for more information on how each mode works.
44.
Beat / Mode:
Tap this button repeatedly at the desired tempo to set the rate of the effects' low-
frequency oscillators (LFOs). Press and hold this button to reset Beat Multiplier to the Deck's
BPM.
Press and hold
Shift
and then press this button to switch between Single-FX Mode and Multi-FX
Mode.
45.
Beat Knob:
Turn this knob to set the Time Division for the selected effects. You can also press it
to reset the Time Division to 1.
46.
FX Assign
: Use these buttons to apply Effect A and/or B to the corresponding channel (Each
effect can be applied to any or all of the four channels).
47.
Channel Filter:
Turn this knob to adjust the filter on the corresponding channel. The type of filter
it adjusts will depend on the
Filter Mode
button.
48.
Filter Mode:
Press this button to cycle through the Filter Modes, which affect the
Channel Filter
knobs:
Off
,
Filter-Roll Mode
, or
Filter-FX Mode
. Please see the
User Guide
for more
information on how each mode works.
