Nukeproof MEGAWATT 297 2021 Manual Download Page 76

M E G A W AT T   B I K E   G U I D E   2 0 2 2   |  

7 6 

Key Points for E-Bike legislation affecting your Megawatt (UK), rest of the world please check 

local legislation/laws regarding e-bike use 

•  Bike must be fitted with pedals which are capable of propelling it. 

•  The maximum continuous rated power of the electric motor must not exceed 250 Watts.

•  The electric assistance must cut-off at 15.5mph

•  E-Bike users must be 14 years and over

•  EN15194 bikes are except from MOT/ Vehicle Tax/Licence 

T h i r d   P a r t y   W a r r a n t y

Please familiarise yourself with the respective manufacturer’s warranty policies. We endeavour to 

select and install the most reliable components for our bikes, any unlikely issues with the following 

third party components please consult with your Nukeproof dealer and they will resolve with 

Nukeproof and the manufacturer on your behalf.    

 

 > RockShox/SRAM Warranty 

 

  

> Shimano Component Warranty 

 

  

> Shimano Steps 

 

  

> Fox Warranty 

Summary of Contents for MEGAWATT 297 2021















































































Reviews: