NUK VAPO RAPID, Operating Instructions Manual

Page: 22 / 102

18
• You should use only normal tap water with-
out added chemicals.
• Ensure that the equipment is descaled on a
regular basis in accordance with "6.2 Des-
caling" to ensure the steriliser continues to
function correctly.
6. Cleaning and care of the equipment
6.1 Cleaning
Warning!
Always detach the plug before cleaning
the device.
Only ever clean the device once it has
cooled down.
Beware! Do not use strong cleaning or
scouring agents,
as these can attack the sur-
faces.
1. Remove lid 1 , accessory basket 3 , bottle
holder 4 as well as steam receptacle 5 from
base 6 .
Beware! The base 6
must never be immersed
in water, as it contains electrical components,
which could become damaged.
2. Wipe base
6 with a damp
cloth after each
use.
3. Clean lid 1 , accessory basket 3 , bottle holder
4 as well as steam receptacle 5 either with
washing-up liquid or in the dishwasher.
6.2 Descaling
Washing out the device on a regular basis will
help to reduce scaling. However, eventually the
boiling process will cause a deposit of limescale
in the base of the steam steriliser.
This limescale can have a detrimental effect on
the disinfecting process.
N.B.: With minor scaling we recommend
you follow the procedure described below using
household vinegar:
1. To descale mix 35 ml hot water with 35 ml
household vinegar and pour into the base 6 .
2. Leave to solution to work in for 30 minutes
and then discard.
3. Wipe the device with a damp cloth.
With
heavy scaling
you should use a proprie-
tary descaler. Please observe the relevant
instructions for use.
Vaporisator 09/08 Seite 18 Dienstag, 7. Oktober 2008 8:17 08