NUK Eco Control Plus Video, Operating Instructions Manual

Page: 42 / 230

42
6.1 DEFAULT SETTINGS
The default settings of the baby monitor are the following:
Menu options Items Parent unit Baby unit
LANGUAGE GERMAN -
LULLABY LULLABY 1 LULLABY 1
SENSITIVITY LEVEL 3 -
TEMPERATURE FORMAT CELSIUS -
TEMPERATURE ALERT OFF -
TEMPERATURE Low 14°C (57°F) -
TEMPERATURE High 30°C (86°F) -
VIBRATION OFF -
ALERT LOW BATTERY ON -
ALERT NO LINK ALERT OFF -
BRIGHTNESS LEVEL 4 -
ECO MODE OFF -
volume
(1)
LEVEL 4 LEVEL 3
(1)
This parameter shall be set on the parent unit directly (chapt. 7.1.2). All other parameters
are set on the parent unit using the on-screen menu (chapt. 7.1.1)
6.2 FULL ECO MODE
The baby monitor provides Full Eco Mode which guarantees safe and efficient supervision on
the lowest high-frequency radiation possible. The baby monitor transmits video and audio data
when the microphone picks up a sound, otherwise it goes into sleep mode. In sleep mode the
baby monitor is 100% free from high-frequency radiation.
As soon as the baby unit detects a sound that exceeds the set sensitivity level, the baby unit is
switched on and establishes a connection to the parent unit. This may take a few seconds. Both
video and audio data are now transmitted. A few seconds after the sounds near the baby unit
stop, the message ‘ECO MODE ACTIVATED’ appears and the baby monitor returns to sleep
mode. The screen goes black again.
The connection indicator light flashes rapidly to indicate that there is no connection once
the baby monitor goes into sleep mode. In this case, this is not a warning, but a
confirmation that the baby monitor is in Full Eco Mode.
In Full Eco Mode sound and video data is transmitted according to the set sensitivity level. If
volume is switched off (chapt. 7.1.2) you will hear no sound.
Check the range of your baby monitor before you use Full Eco Mode. Make sure you are
within range.
6.2.1 Switching Full Eco Mode On/Off
1. press the M button at the parent unit to open the menu
2. use the or buttons to scroll to ECO MODE
3. press the M button
4. use the or buttons to set the function ON or OFF
5. press the M button to confirm your choice
6. press the
button to close the menu
For further information to the parent unit’s on-screen menu see chapt. 7.1.1.
Note
21