NUK e-Motion, Operating Instructions Manual

Page: 24 / 128

20
age as there is a danger that small parts
may become detached and swallowed.
• Do not leave teats in cold sterilising solu-
tion beyond the period specified by the
manufacturer, as this may cause damage to
the material.
• For hygiene and safety reasons, teats should
be replaced every 1-2 months.
• Use teats only with NUK FIRST CHOICE
Bottles. The NUK Vented Teat and NUK
Breast Milk Container comply with
EN 14350.
4. Names of Parts
(Figure
➃
)
1 Valve
2 Breast shield
3 Connection ring
4 Lip valve (+ 1 Replacement lip valve)
5 Breast milk container
6 Stand for breast milk container
7 Sealing disc
8 Protective cap
9 Screw ring
10 Teat
11 Power supply plug
12 Motor unit
13 Warning light when the voltage is too low
(batteries need changing)
14 On/off button
15 Battery compartment catch lock
16 Battery compartment lid
17 Suction power regulator
18 Mains adapter
19 Interchangeable plug attachments
5. Cleaning and Sterilising
Hygiene is of priority when handling
breast milk and all parts that come
into contact with it. The pump should
therefore only be used in a clean and
sterile condition.
5.1 Recommended cleaning times
After each use:
• All
accessories
except for the motor unit
12
and adapter
18
must be thoroughly
cleaned with water and sterilised
immediately after each use.
5.2 Cleaning
(Figure
➀
in reverse order)
Caution! Unplug the mains adapter 18 from the
wall socket before cleaning.
Caution!
Clean the lip valve
4
carefully. Hard
and pointed bristles as well as sharp objects may
damage the valve.
1. Unscrew the motor unit 12 together with
the connection ring
3
from the bottle
5
.
2. Remove the lip valve
4
from the lower part
of the breast shield.
3. Unscrew the connection ring 3 from the
motor unit 12 .
4. Pull the motor unit
12
off the breast
shield
2
.
5. Remove the valve 1 from the breast shield 2 .
6. All accessories 1 - 10 (not the motor unit
12
, the parts
11
,
18
and
19
) should be
cleaned and rinsed under running water as
milk residues may result in the build up of
bacteria and may damage the material. If nec-
essary use mild detergent.
7. Wipe the motor unit
12
with a damp cloth.
Caution: Never immerse the motor unit or
adapter in water as this could damage the
electrics.
eMotion 1.0 0910 Cluster 1 Seite 20 Montag, 6. September 2010 6:31 18