- 3 -
1. Fast Installation
1.1. Camera Interface Explanation
◼
Camera Lens
◼
Remote Controller Receiver Light
◼
Camera Base
◼
Tripod Screw Hole
◼
Mounting hole
◼
RS232 Control Interface (output)
◼
RS232 Control Interface (input)
◼
RS485 Input (left +, right-)
◼
USB2.0 Interface
◼
DC12V Input Power Supply Socket
1.2. Power on initial configuration
（
1
）
Power on: Connect DC12V power supply adapter with power supply socket.
（
2
）
Initial configuration: Power on with power indicator light on and remote-control receiver light blinking,
camera head moves from bottom left to the bottom, and then goes to the HOME position
(intermediate position of both horizontal and vertical), while the camera module stretches. When
remote control receiver light stops blinking, the self-checking is finished
Note: If you set preset 0, when Power on self-test is completed, the camera automatically moves to
the preset 0 position.
1.3. Video Output
This model support USB2.0 video output.
Connect camera and computer by USB2.0 cable, choose video conference software for image.
