18
mynugeni.com
Handheld Operation
Charge Up
1. Remove battery insulating tab: pull firmly.
Power Up
1. Press power button to turn unit on
> normal mode: solid green light
2. Press power button again to turn
unit off.
Normal Power
3
Note: Full charge requires approximately 2.5 hours
T A B
4
2. Open upper battery cover: grasp top edge and pull
out firmly to “snap” cover open.
3. Connect power adapter to charging port and insert
plug securely into outlet socket.
4. Charge indicator light will illuminate
when successfully connected:
> charging: blinking green light
> fully charged: solid green light
Normal Mode:
22
min.
Turbo Mode:
18
min.
Typical Run Times:
H A N D H E L D
1
1
2
Push in and slide switch down to
extend on-board brush bristles.
On-Board Brush Tool
1. Press turbo button to activate Turbo
Mode for enhanced suction power.
> turbo mode: solid blue light
2. Press turbo button again to return to
normal mode.
Turbo Power
While vacuum is running in normal mode
1
Use
only the charger provided
to recharge your Nugeni
vacuum. Charge vacuum
with standard electrical
outlet only (120V/60Hz)
WA R N I N G
!
For convenient charging and storage, we recommend
installing the handheld unit into the mopstick and
placing on the charging & storage dock - see p.21 for
detailed instructions.
5. When ready to use, unplug power adapter.
6. Lift battery cover back up and press firmly inward
to “snap” cover securely closed.
To charge handheld unit directly, follow these steps:
See p.21
Online
Help
Videos
