ITEM
Maintenance Schedule
PROCEDURE
Anchor Plates
Appliances
CO/LP Detector
Doors
Exterior Lighting
Fire Extinguisher
Jack Brackets
Propane System
Propane Tanks
Safety Equipment
Smoke Detector
Water Pump Filter
Water System
Weight Distribution
Drains
Exterior
GFCI Outlet
Wood Surfaces
Battery
Electrical System
Interior Surfaces
Sealants
Wiring
Air Conditioner
Cabinets
Camper Jacks
Door/Window Seals
Exterior Protection
Upholstery
Annual Inspection
Hinges
Plumbing System
Window
Inspect and secure if necessary
Check for obstruction on exterior vents
Test
Check seals, lubricate hinges
Verify proper operation of all lighting
Check fill level
Inspect and secure if necessary
Check for leaks/Professional inspection
Bleed after filling
Verify operation of all safety detectors
Test
Inspect for debris
Proper operation and leak free
Verify proper weight distribution
Verify drains are free of obstruction
Wash with mild detergent
Test
Clean
Check battery condition and charge
Check proper operation and for damage
Clean
Inspect caulking seals and reseal if needed
Clean cables, terminals, tighten wing nuts
Inspect/tighten air conditioner
Apply furniture polish
Inspect jacks and lubricate
Check for damage
Apply automotive/marine wax
Clean
Complete annual inspection by your dealer
Lubricate
Professional inspection
Lubricate with graphite based lubricant
See appropriate sections for
specific procedure instructions