Truck Campers • nucamprv.com
44
EQUIPMENT & HARDWARE
STANDARD DINETTE/BED CONVERSION
To convert the dinette to a bed:
1. On the table leg, pull the clip to unlock the leg and allow it to
fold slightly.
2. Release the clips to unfasten the table from the top rail bracket.
3. Drop the table to the next rail and clip it on. The leg will need to
fold onto the floor in flat position.
4. Pull the seat cushions inward to the center of the table and seatback
cushions into the vacancy created by the seat cushions.
5. Arrange and adjust the cushions to create the bed.
To convert back to dinette:
1. Set cushions on right and left to upright positions.
2. Unclip the table from the rail and lift it up to the top rail again.
3. Clip the table in place on the rail.
4. Lock the leg in place.
5. Adjust as needed.
LAGUN DINETTE/BED CONVERSION
To convert the dinette to a bed:
1. On the table leg, pull the clip to unlock the leg and allow it to
fold slightly.
2. Release the clips to unfasten the table from the top rail bracket.
3. Drop the table to the next rail and clip it on. The leg will need to
fold onto the floor in flat position.
4. Pull the seat cushions inward to the center of the table and seatback
cushions into the vacancy created by the seat cushions.
5. Arrange and adjust the cushions to create the bed.
To convert back to dinette:
1. Set cushions on right and left to upright positions.
2. Unclip the table from the rail and lift it up to the top rail again.
3. Clip the table in place on the rail.
4. Lock the leg in place.
5. Adjust as needed.
Pinch point hazard. Keep limbs clear
of the arm extension when retracting
the awning. Serious injury or death
can occur from not keeping clear of
pinching points.
WARNING
When chances of high wind, heavy
rain are present or when leaving the
camper retract the awning completely.
Failure to comply may result in damage
to the awning.
CAUTION
