3
22. 09. 20. Document Number 671188
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
ESBH
Installation Manual
2.1 Code Description:
1
2 3
-
4
5
ESBH
S
1
-
L
C
1. Range:
Ecosmart Boxer AHU
2. Airflow Type:
EX
= Extract
S
= Supply
3. Unit Size:
1 - 7
4. Heating Type:
E =
Electric
L =
LPHW
5. Cooling Type:
C =
CHW
D =
DX
2.2 Typical Unit Arrangements
Unless otherwise stated i.e. RHT in unit code, all control packs are
positioned on the left of the unit when viewed with direction of airflow.
For any alternative control or pipework position, contact us on the
number opposite.
2.2.1 Non-Modular Unit Arrangement (Sizes 1 and 2)
ESBHS*E
ESBHS*L
ESBHS*LC
ESBHEX*
Plan
2
Non-Modular Unit Arrangement
2.2.2 Modular Unit Arrangements (Sizes 3 - 7)
Plan
control
packs
3
Modular Unit Arrangement
2.3 Dimensions & Weights
Full details, with project specific documents and drawings are available
from the Nuaire Technical Estimating Department.
2.4 Handling
Upon receipt of the equipment an inspection should be made, and
before commencement of lifting ensure that normal equipment safety
checks have been carried out.
The unit/sections should be removed from the vehicle using a fork lift
or crane. Always handle with care to avoid damage and distortion, and
where lifting slings are employed use spreaders to ensure slings do not
come into contact with the unit case, or control pack (Figure 4).
Correctly position slings to avoid twisting of the unit case and observe
the centre of gravity before the final lift is made.
Note: The weight of the unit from the rating plate.
Dependent on model and size units may be supplied in single or
multi-module sections. Handle each section individually
do not stack
for lifting or storage.
