NMC 430 Users Guide
Check the Sealing
2.3.3 Battery
Charging
Please charge the battery before using the PDA for the first time, charge the
battery until the LED indicator turns solid green. To charge the HW430, use a
cable or a docking with appropriate power supply. For more information about
the HW430 accessories, see
chapter
5
.
To charge the battery using USB/ Charge cable:
1. Connect the power supply output connector to the input power port on the
USB/Charge cable.
2. Remove the protective rubber and connect the USB/ Charge cable to the
bottom of HW430. The battery charge LED indicates the battery charging
status
LED
Status
Indication
OFF
HW430 is not charging
HW430 is not properly connected to a power
source
Solid Red
HW430 is in charging process
Solid Green
Charging complete
This product uses a non-removable battery. The battery should
only be removed when you want to change the SD Card or SIM
Card.
To charge the battery using Docking:
1. Connect the docking to power, Insert the HW430 into the slot to
begin charging.
9
