NTT docomo XPERIA A SO-04E with Series, Instruction Manual

Page: 186 / 284

184
Applications
Sending data
1
Make sure that the NFC Reader/
Writer, P2P function is enabled.
2
Display data to send on the screen.
3
Face the marks each other with
the receiving terminal.
･
The displayed screen becomes small,
and "Touch to beam" appears.
･
When software license agreement
appears, tap [Agree] and follow the
onscreen instructions.
4
Tap the screen that has become
small.
Receiving data
1
Make sure that the NFC Reader/
Writer, P2P function is enabled.
2
Face the marks each other with
the sending terminal.
･
When data is received, an application
that supports the data opens. Follow
the onscreen instructions.
･
When holding mark over the other device,
make sure not to hit the terminal strongly.
･
Hold the mark over parallel to the center of
the other device.
･
If mark is not recognized even when
holding over the device, try lifting the
terminal slightly, or moving the terminal back,
forth and around.
･
If there are metal objects between mark
and the other device, scanning may be failed.
And note that putting the terminal in a case or
cover may affect communication
performance.
Notes on holding the mark over
the other device such as a
reader or device with the NFC
module