NTT docomo Arrows Me F-11D, Instruction Manual

Page: 76 / 157

Settings
74
◆ Security lock
By setting to require authentication on the locked screen,
you can prevent others from misusing the terminal.
You can also use authentication operation set in the
security unlock setting when using Password manager.
❖
Setting screen lock authentication
Set to authenticate on the screen when returning from the
sleep mode.
･
To validate authentication setting for the screen lock, set
security unlock preference in advance.
1
From the Home screen,
m
→
[Settings]
→ [Security] → [Screen lock auth] →
Authenticate
❖
Setting security unlock preference
Set unlock the screen lock or type of authentication
operation for Password manager.
1
From the Home screen,
m
→ [Settings]
→ [Security] → [Security unlock preference]
2
Authenticate
･
To set for the first time, authentication is not
required.
3
Select an unlock preference
Entering pattern to unlock : [Pattern]
→
Slide like
jointing at least four points vertically, horizontally
and diagonally to enter a pattern
→ [Continue] →
Enter the same pattern → [Confirm]
･
When you set for the first time, "Securing your
phone" and "Example pattern" appear.
Entering security code to unlock : [Security code] →
Enter a 4- to 16-digit security code → [Continue] →
Reenter the security code
→
[OK]
Entering password to unlock : [Password] → Enter a 4-
to 16-digit password including alphabets →
[Continue] → Reenter the password → [OK]
✔
INFORMATION
･
To change set pattern, security code or password, from
the Home screen,
m
→
[Settings]
→
[Security]
→
[Change unlock pattern]/[Change security code]/[Change
password] and then perform necessary operations.
･
If you do not want to display the pattern when unlocking
the screen, from the Home screen,
m
→ [Settings] →
[Security] → Tap [Make pattern visible] to unmark.
･
To enable vibration when entering the pattern, security
code or password, from the Home screen,
m
→
[Settings] → [Security] → Tap [Vibrate on touch] to mark.
❖
Locking screen automatically
･
To validate screen lock authentication, set security
unlock preference in advance.
1
From the Home screen,
m
→
[Settings]
→ [Security] → [Automatically lock] → Select
a time
When set time elapses after sleep mode, the screen is
locked automatically.
❖
Manual screen lock
1
X
The terminal goes into sleep mode and the screen lock
is locked.