NTM EZ-Counter, Operation And Maintenance Manual

Page: 7 / 18

EZ-Counter Manual
4
Manual Operation:
The machine can be manually operated from the home screen by pressing
the F and R buttons to make the machine jog Forward or Reverse.
Reset:
Press the Reset button to reset the length counter after shearing the
material. If a programmed job is run, the Current Position will
automatically reset.
Job Entry:
Jobs (or lengths) can be programmed into the controller. The machine
will run until the specified length is reached and the controller will stop
the machine. The controller can store up to fifty jobs or different lengths.
Input the length of the part to be made and press Run to run the part or
press the Up and Down buttons to input another job.
The Job Number display is also an input field. To skip many jobs without
having to press the Up and Down buttons, press the Job Number display
and enter the desired job number to program or run.
When using Imperial units (ft/in. & in.), any length with a valid fraction
can be entered. If the fraction entered is invalid with a “0” in the
numerator or denominator, an invalid fraction screen will popup if the job
is attempted to be run.
Figure 5: Error - Invalid Fraction
Miters:
If the part to be run will be cut on the ends to make a miter, the extra
length needed to cut the miter(s) can be added automatically.
Example: