NTM EZ-Counter, Operation And Maintenance Manual

Page: 13 / 18

EZ-Counter Manual
10
Totalizer:
From the Settings screen, press the Totalizer button to view and reset the
total length counter. This counter is not password protected and can be
reset at any time.
Figure 18: Settings – Totalizer
Security:
From the Settings screen, press the Security button to access the security
settings and password protected length counter. This section is useful if
the owner of the machine suspects a crew is running more material than
expected. For this feature to be effective, the manual start buttons must be
disabled in the contactor box, See drawing: EZC-G (gutter machines) or
EZC-P (SSR machines).
If the password is set to “0”, no password will be required to access the
security screen. If the password is set to anything except “0”, a password
will need to be entered to access the security screen.
Figure 19: Enter Password
The total counter will track the length of coil that goes through the
machine as long as the encoder is reading the material. If the encoder has
been disconnect or disabled, the controller will track the amount of time
when the encoder is not reading material but the machine is being jogged
forward from the controller (not the manual push buttons). Press the
Change PW button to change the password.