NTI XTENDEX 328 Foot HDMI USB KVM Extender over HDBaseT
8
INFRARED CONTROL
The XTENDEX includes ports for connecting an infrared emitter and receiver (included) to work in conjunction with the IR remote
control used to operate the signal source. Connect the receiver to the “IR IN” port on the Remote Unit and the emitter to the “IR
OUT” port on the Local unit. Position the end of the receiver such that the signal from the remote control can easily reach the IR
sensor. Position the end of the emitter such that the extended signal can be sent to the signal source.
Figure 5- Connect IR Emitter and Receiver
3.5MM Mono Plug
IR Emitter
3.5MM Stereo Plug
IR Receiver
IR-RCVR-3
IR-EMTR-3
Note: The IR Emitter and Receiver work within a frequency range of 30-50kHz. Check the
specifications for the device you are extending to make sure the XTENDEX will work with it.