NTI VEEMUX VIDEO MATRIX SWITCH
5
Connect the Sources and Monitors
1.
Turn OFF power to all video sources (inputs) that will be connected to the VEEMUX before connecting or
disconnecting any cables.
2.
Connect a VEXT-xx-MM cable from the video port of a video source to a 15HD female video connector
labeled VIDEO 1 on the VEEMUX. (See Fig. 1)
3.
Connect additional video sources to remaining 15HD female VIDEO x connectors as desired.
Figure 3- Install Video Source Cables
4.
Connect a monitor to the 15HD female connector labeled MONITOR 1 on the rear of the VEEMUX (See Fig. 2).
5.
Connect additional monitors to remaining 15HD female MONITOR x connectors as desired.
Figure 4- Connect a monitor to the VEEMUX
