NTI E-ACLM-V/-P AC LINE MONITOR
6
E-ACLM-Pxx-V2
Connect Voltage Source and Load
1. Connect a voltage source (50-250VAC, 47-63Hz) to the ACLM-Pxx at “AC IN”.
2. Connect an AC load device to the “AC OUT” that is compatible with the voltage source connected to “AC IN”. The device
connected to “AC OUT” must be rated at 12A or less for model –P12, 8A or less for –P8, or 18A or less for –P18.
Figure 3- Connect E-ACLM-P12 to voltage source and load
Figure 4- Connect E-ACLM-P18 to voltage source and load
The use of E-ACLM-P18
requires E-xD firmware
version 2.35 or newer
