NTI E-ACLM-V/-P AC LINE MONITOR
i
TRADEMARK
ENVIROMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries.
COPYRIGHT
Copyright © 2007-2021 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.
FEATURE UPDATE
In order to take full advantage of the available features in the E-ACLM-V/P, the E-xD that it is connected to must first have
firmware version 4.5 or later installed.
In order for the E-xD to add the Frequency sensor of the E-ACLM-V/P to the list of sensors, any previously installed E-ACLM-V or
ACLM-P must first be deleted from the E-xD Summary page. Within 30 seconds the E-xD will re-sense the E-ACLM-V/P and will
include the Frequency sensor in the list of sensors. All applicable sensors included with the E-ACLM-V/P (including Frequency
Sensor(s)) will then be available for configuration.
The use of E-ACLM-P18 requires E-xD firmware version 2.35 or later to view the full scale (page 8).
To reduce the risk of electric shock- Disconnect power to the receptacle
before installing or removing the unit.
To Reduce the Risk of Electric Shock- Use only Indoors
Do not plug into another relocatable power tap.
Risk of electric shock, do not remove cover.
No user serviceable parts
inside. Refer servicing to qualified service personnel. For use in a
controlled environment (see page 12).
!
CAUTION
