NSO KT1601, Instruction Manual, Page: 44 / 257

Removing Battery Pack
a Detach the back cover (P36)
b Hold the battery pack up in the
direction of arrow mark using the
concave part of the terminal with
your fi ngertip, and then remove it
Charging
Battery Charge
• For detailed information, refer to instruction
manuals for AC Adapter 05 (optional) and DC
Adapter 04 (optional).
• AC Adapter 05 can be used from AC 100 V
to 240 V.
• The shape of AC adapter plug is for AC 100
V (Japanese specifi cation). A conversion plug
adapter for the destination country is required
when using an AC adapter compatible from
AC 100 V to 240 V. Also do not use a
transformer for overseas travel to charge.
• When the terminal is turned ON, you can
operate the terminal even while charging.
However, in that case, charging takes longer
time because of reducing charging volume.
• Do not apply excessive force when inserting
or pulling out the connector. Insert or pull it
out slowly.
• Do not remove the battery pack while
charging.
• When charging with an entirely empty battery
pack, it may take a while to power on this
terminal.
47
Confi rmation and Settings before Using