NSO KT1601, Instruction Manual, Page: 42 / 257

nano UIM card Security Codes
You can set the security code named PIN
in nano UIM card. "0000" is set at the time
of subscription. Customers can change PIN
afterwards. For details about PIN of nano UIM
card, refer to "PIN code" (P185).
Inserting nano UIM card
a
Detach the back cover (P36)
b Remove the battery pack (P47)
c Insert the nano UIM card into the
nano UIM card slot all the way to the
end in the arrow direction with the IC
chip facing down
Removing nano UIM card
a Detach the back cover (P36)
b Remove the battery pack (P47)
c Remove the microSD card (P199)
d Put the fi nger in the groove on the
end on nano UIM card slot, and pull
the nano UIM card in the arrow
direction (
a
)
e Take out the nano UIM card straight
in the arrow direction (
b
)
45
Confi rmation and Settings before Using