NSO KT1601, Instruction Manual, Page: 156 / 257

Connecting to a Wi-Fi ® network
a From the Home screen, "Apps"
X
"Settings"
X
"Wi-Fi"
• When "Wi-Fi tutorial" screen is displayed,
tap "Continue" to start a tutorial, or tap
"Close tutorial" to display "Wi-Fi" screen.
b Turn on "Wi-Fi"
c
Tap the Wi-Fi
®
network that you
want to connect to
• If you try to connect to a protected Wi-Fi ®
network, you will be prompted to enter the
security key for that Wi-Fi
®
network. Tap
the "Password" box, enter the network
password and tap "Connect".
• Usually, when you enter a password,
the last character entered is displayed
and as many "・" as the number of
characters appear instead of previously
entered characters. All characters can be
displayed when you place a check mark in
"Show password".
• To connect to the access point which
supports WPS, on the "Wi-Fi" screen tap
X
"Advanced Wi-Fi"
X
"Connect by WPS
button"/"Connect by WPS PIN"
X
operate
on the access point side.
Note
• Open network and protected network are
two types networks that are available.
The network type is indicated by an icon
to the network name. represents
an open network and represents a
protected network. The icon also indicates
the signal strength.
Strong signal: Weak signal:
• To search Wi-Fi
®
network again, tap
"Search" on the "Wi-Fi" screen.
• Network name is not displayed depending
on the settings for the access point even if
the network is connectable. If this happens,
you can still connect to the network. Refer
to "Adding a Wi-Fi
® network" (P160).
• When establishing a Wi-Fi ® network
connection, the required information is
generally obtained from a DHCP server
automatically. However, it is possible to
specify these items separately.
159
Settings