16
12-1 Specifications
<Control Unit>
<Motor Handpiece>
Product Name VOLVERE i7 CONTROL UNIT
Model
VOLVERE i7 RMS
Model
NE315
Speed
1,000min
-1
- 35,000min
-1
Rated input
AC 100 V to AC 240 V, 50/60 Hz, 60 VA
Dimensions
145 mm (L) × ø24.5 mm
Rated output DC 35 V 0.5 A
Cord length
1.2 m
Dimensions
69 mm (W)×185 mm (D)×167 mm (H)
Weight
245 g
Weight
930 g
Remarks
Combination of UHR45C and
GX35RM-B & SCD
<E-type Motor>
Model
GX35EM-B & SCD
Speed
1,000min
-1
- 35,000min
-1
Dimensions
109.3 mm (L) × ø24.5 mm
Cord Length 1.2 m
Weight
170 g
<Foot Control>
Model
FC-76
Dimensions
80 mm (W) × 136 mm (D) × 60 mm (H)
Cord length
2 m
Weight
221 g
Temperature
Humidity
Pressure
Operating conditions
0 - 40 °C
30 - 75% RH
-
Transport/storage conditions
-10 - 50 °C
10 - 85% RH
500 hPa - 1060 hPa
12
Specifications
<Handpiece>
Problem
Cause
Solution
The handpiece does not run while the
bur lock ring is in the LOCK position.
Entry of foreign matter in the ball
bearings or seizure.
Contact your Authorized NSK Dealer.*
Heat is generated during rotation.
Entry of foreign matter in the ball
bearings, causing wear of the
bearings.
Contact your Authorized NSK Dealer.*
Vibration or noise occurs during
rotation.
Entry of foreign matter in the ball
bearings, causing wear of the
bearings.
Contact your Authorized NSK Dealer.*
A bent bur is used.
Replace the bur.
Run out of the bur is heavy.
Dust may be stuck in the chuck.
Clean the inside of the chuck.
The chuck is worn.
Replace the chuck.
The ball bearings are worn.
Contact your Authorized NSK Dealer.*
The bur comes out.
The chuck is loose.
Tighten the chuck securely.
*Cannot be fixed at dental clinics, etc.
