background image

1

Introduction

Welcome

You are entering a new era of microprocessor controlled stage lighting technology.  The
powerful NSI Micro-Plex designs involve the electrical marriage of microprocessor technology
and digitally controlled multiplexing.  The result is a control package with the flexibility for
a variety of innovative applications.

The NSI TLC 16 Lighting Console features an advanced microprocessor based design
containing many benefits found in today’s personal computers.  This technology provides for
adding programmable Memory Scenes and Chase effects to the simplicity of a touch panel
console.

The NSI Micro-Plex technology found in all NSI products allows components of your lighting
system to be interconnected by way of standard 3-conductor microphone cables or audio
snakes.  Up to 128 individual control signals may be transmitted to dimmer packs through
a single microphone cable and the returned phantom power eliminates the need for AC power
cords on NSI controllers.  This makes the remote placement of the TLC 16 Lighting Console
easy and convenient.

The NSI TLC 16 Lighting Console represents our continuing commitment of leading the
industry in defining technological advances for stage lighting.

Welcome to the era of microprocessor controlled stage lighting!

TLC 16

Introduction

Software Revision 1.00 version A and above

Welcome

NSI CORPORATION

Features and Specifications may change without notice 

1

Summary of Contents for TLC16





















Reviews: