4
5
Now press the
MONTH
and
DATE
buttons to modify the
ending DST settings. Pressing
DAY
changes the default day.
EXAMPLE: A screen showing “10: L SU E” represents Octo-
ber (10), the Last week (L), Sunday (SU), and the End (E) of
daylight savings time.
Press
ENTER
to save and the display will show the modified
DST starting date.
Press
MODE
twice to go to step 5.0.
5.0 HOLIDAY DATES
You are able to select up to 9 holiday blocks, which will
exclude all of the regular schedules, and execute a special
set that will only run on those specified days. If no holiday
schedule is entered in step 6, operations will be omitted
during the block. Holiday blocks can be anywhere from 1
day in length (the same start and end dates) or up to 364
days. Holiday blocks cannot end after they begin. If a holi-
day block must run from December 18th through January
5th, you have to program one block from 12/18 to 12/31,
and then another from 01/01 to 01/05.
To skip, press the
MODE
key.
5.1 TO SET HOLIDAY DATES
Press the
ENTER
key.
Press the
MONTH
and
DATE
keys to set the date to the
desired start date (H1 ON).
Press the
ENTER
key.
For a single day holiday, press the
ENTER
key, or press the
MONTH
and
DATE
keys to set the date to the desired end
date (H1 OFF).
Press the
ENTER
key.
Repeat for all holidays.
Press
MODE
when holidays are complete.
6.0 SCHEDULE SET MODE
6.1 SETTING HOURS, MINUTES, AND DAYS
NOTE:
A schedule is needed for each event. If a typical
ON/OFF pair is required, use SCH 01 for the ON event
and SCH 02 for the OFF event.
Press the
HOUR
and
MIN
keys to set the desired time. Press
EVENT
to set desired event (ON or OFF). Press
CH SELECT
key to select the channel on DG200A. Press
DAY
to set
desired day(s).
NOTE:
With each
DAY
button push a different group of
days will appear.
