PM-100 CERTISAFE™ PIPE MOUNT
MANUAL
852113 / 2021.1.1
10
Lower Mount Assembly
1.
Slide the lower mount can strap (G) into position on the unit 3” from the cage, ensuring the clamp on the mixer cage is in line with
the can strap flanges.
2. Secure the can strap with a
3/8”-16 x 1” hex head screw
(K), lock washers (L), and nylon lock nut (M). Be sure
that there is a lock washer on either side of the flanges.
Fig. 11
3 inches
G
Maintain alignment
Fig. 12
K
M
L
3.
Position the strut plates (I) and collar blocks (H) together as show below, forming the largest hole for the pipe to pass through.
4.
Fasten using two 3/8”-16 x 5” hex screws (J) and nylon lock nuts (M).
I
H
J
M
Fig. 13
Cage clamp
Back to Contents