G-18.mft with vending machine control system
G
ENERAL
INFORMATION
7
National Rejectors, Inc. GmbH, Buxtehude
1
General information
This chapter should provide a general overview of the advantages and
options regarding the coin validator G-18.mft with a vending machine control
system for 1-5-chute machines. The first section, however, is designed to
help you navigate easily within these operating instructions.
General information about these instructions
These operating instructions describe the design and operation of the
electronic coin validator G-18.mft with a vending machine control system for
1-5-chute machines. Chapters 6 und 7 explain the necessary steps for
starting up and operating the coin validator. Chapter 8 explains how to clean
the coin validator and remedy the cause of a malfunction.
The appended index and glossary reduce the search for specific explanations.
Since the G-18.mft can be used not only as a vending machine control
system for 1-5-chute machines but also in other operating modes, these
operating modes have been briefly described in Chapter 3. You will find a
detailed description and instructions regarding the use of these operating
modes in the separate general operating instructions for the G-18.mft.
To make it easier for you to navigate within these instructions and to operate
the device, the following accentuations were made in the text:
•
Safety instructions
that must be taken into account in order to
protect operators and equipment have been written in bold and
provided with the pictogram
.
•
Special
notes
, which are to facilitate the use of the coin validator, have
been written in italics and also been given a pictogram
.
•
Requests to perform an action
are numbered in another typeface.
•
At the beginning of a chapter you will find a short "guide", which
summarizes the content of the chapter.
