31
National Rejectors, Inc. GmbH, Buxtehude
M
AINTENANCE
AND
SERVICE
4
Fig. 12c: Sensor access through coin outlet
5
3
4
Fig. 12b: Parts to be cleaned
3
Clean payout disc [12b/3] and all other parts,
that are contaminated by the coins, with a
cloth/brush.
Under no circumstances may the cloth
be so wet that fluid runs into the
device. Other the hopper will be
damaged.
4
Clean the sensor [12b/c/4] using a cotton
bud with ethyl alcohol (access through coin
outlet [12c/5]).
5
Let dry the damp parts for approx. 5 min.
6
Re-engage the safety flap.
7
Reconnect the machine to the
mains supply.