8
National Rejectors, Inc. GmbH, Buxtehude
G
ENERAL
INFORMATION
General information about the hopper currenza h
2
The electromechanic hopper currenza h
2
is a coin payout system for
machines. Depending on the model and the coin type it can collect 2,000 and
more coins, in order to be able to pay out these coins as change on
command of the machine control system. Due to its high capacity the
hopper is used in machines, that have to pay out certain coins as change
frequently, such as money changers, vending and amusement machines.
The hopper models h
2
L and h
2
X are projected and cannot be
delivered yet.
The hopper is fitted with a machine interface, that can be configured for
parallel or serial ccTalk operation according to requirements. In the case of
the parallel interface the hopper communicates with the machine control
system using signal lines, whereas the ccTalk interface allows the hopper
to use the serial ccTalk data transfer protocol to communicate with the
control system as slave. The interface is configured according to customer
requirements on delivery.
The reliable and low-maintenance payout mechanism in the form of a
rotating disc driven by a motor is designed extra ruggedly, so that it
withstands innumerous coin payouts permanently.
If the hopper is to be filled automatically, it can interact with a coin validation
system without any problems (e.g. NRI coin validators G-13.mft, G-40 or
NRI coin changers c
2
, E-66/A-66, G-46).
The currenza h
2
features
•
Models in various sizes for a coin capacity as high as possible
depending on the machine dimensions
•
Space-saving dual hopper installation thanks to coin passage
•
switchable machine interface for parallel or serial ccTalk operation
•
Suitable for paying out a lot of different coin types
•
Payout speed of up to 7.5 coins per second
•
Operating safety due to coin payout sensors, automatic error
detection and anti-jam function
•
Optional empty and full recognition