NRG Systems LOGR-S User Manual Download Page 57

Page: 57 / 73

NRG Product Manual

LOGR-S Data Logger

NRG_LOGR-S_Manual
Rev. 1.0

[email protected] | Page 57

5 November 2021

APPENDIX A | TECHNICAL SPECIFICATIONS

Please see

nrgsystems.com

for up-to-date product specifications.

Description

Instrument type

High utility data logger and real-time sensor interface

Applications

Solar resource monitoring

Data Collection

Sampling interval

1 Hz (IEC 61724-1 compliant)

Averaging interval

1-minute (IEC 61724-1 compliant)

Real time clock

Internal battery-backed with time synchronization

Storage medium

8 GB microSD

Maximum data
storage

90 days (all data with maximum configuration)

Channel Capacity

• Fourteen (14) analog channels (single

-ended); Seven (7) differential

• Twenty

-four (24) serial channels via two (2) RS-485 communication ports

• Two (2) PV Input channels (soiling measurement)

• Ten (10) calculated chan

nels plus dedicated soiling ratio calculation

• Counter channel support coming soon

Analog Channels
Sensor Compatibility

Compatible with a wide array of sensors including:

• Standard analog sensors including NRG meteorological sensor suite (T60

Temperature, BP60

Barometric Pressure, RH5X Relative Humidity, etc.)

• Industry

-standard pyranometers (Hukseflux SRxx series, EKO MS-xx series, Kipp & Zonen

CMP series, etc.)

• 10K NTC Thermistor and RTD (PT100, PT1000) type temperature sensors

Analog Measurement
Accuracy

Uncertainty (k=2):

  450 µV @ (-10 to +10) V
  61 µV @ (-1 to +1) V
  8.5 µV @ (-70 to +70) mV

RS-485 Channels
Sensor Compatibility

Supports configurable Modbus RTU data acquisition. Contact NRG to discuss support for
additional model types or protocols.

Parameters recorded
for each channel

• Average

• Standard deviation

• Minimum/Maximum 1

-sec sample

Note: Statistics reported on each channel dependent on measurement type

Data delivery

• Real

-time data delivery via Modbus registers (TCP via Ethernet or RTU via RS-485)

• Scheduled delivery of historical data via FTP

• On

-demand transfer of historical data via internal web server to FTP

Security

Password-protected web server access

Resolution

Analog measurement
resolution

24-bit signed A/D conversion

Software

Type

• Onboard web server for logger configuration and administration

• Modbus Demo Client to test configured unit prior to connecting to SCADA

Summary of Contents for LOGR-S










































































Search results

Summary of Contents for LOGR-S

Reviews:

Related manuals for LOGR-S

Brands by name

Popular brands

NRG Systems LOGR-S, User Manual

Search results

Summary of Contents for LOGR-S

Reviews:

Related manuals for LOGR-S

Brands by name

Popular brands